banner1
banner1-patch cord
banner2-plc
banner3-onu

Products

You are here: Home » Products » ONU & OLT » FA-EONU8421 EPON ONU Optical Network Unit with 4FE+2POTS+WIFI for FTTH/FTTD
Share to:

FA-EONU8421 EPON ONU Optical Network Unit with 4FE+2POTS+WIFI for FTTH/FTTD

PON Port:
10/100M Port:
POTS:
WiFi:
Application:
Quantity:
  • FA-EONU8421
  • Fiberall
  • SM

FA-EONU8421 EPON ONU with 4FE+2POTS+WIFI for FTTH/FTTD


FA-EONU8421 (4FE+2POTS+WIFI) is an EPON user terminal, which meets the SOHO broadband access ,FTTH broadband speed ,FTTH/FTTD of cable-television operator. The equipment based on mature, stable, cost-effective Gigabit EPON technology combines Gigabit Ethernet switching technology, WIFI and high-quality VoIP technology. It has high reliability, ease of administration and good QOS. The technology performance meets the IEEE802.3ah, China Telecom EPON equipment technical requirements (V2.1) specification requirements.

 

Special Features 

 Data service function

Full speed without blocking exchange

8K MAC address table

Support Full Range VLAN ID

Support QinQ VLAN1:1VLANVLAN Trunk etc.

support port monitor, port mirror ,port speed limit ,port SLA etc.

QoS based on interface, IEEE 802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLANID, destination MAC or source MAC.

The Ethernet interfaces according to the specifications of the IEEE802.3.

128-bit AES encryption algorithm.

According to 802.1x remote management and user authentication


 Telephone service function

Support SIP protocolH.248 protocolH.323 optional.

Support ITU-T G.711G.723.1G.729 compression algorithm

Echo cancellation meets ITU-T G.168-2002. echo cancellation for the longest is 128ms.

Support OSPF,T38.

Support RFC2833 and RFC2833 redundant, distinctive ringing ,MD5 certificate, call forwarding, call waiting, telephone hotline, alarm clock, abbreviated dialing and etc.

Support two POTS interface three-way calling, three-way calling support local mixing.

Support POTS GR909 line test function.

Support dynamic PPPoE, dhcp and static IP.

Support CTC2.1 standard

7×24h call lose≤0.01%

 

Product specifications

Item

Parameter

Specification

Optical   interface specification

Transmission   rate

=  Downstream1.25   Gbps

=  Upstream1.25   Gbps

Optical   specifications

=  Downstream

         Wavelength1490nm+/-20nm

         Minimum receiver sensitivity-27dBm

         Receive saturation power-3dBm

=  Upstream

         Wavelength1310nm+/-50nm

         Minimum output optical power0dBm

Number   of users can be connected

Up   to 32 users within 20km.

Fiber connector

SC/PC

Optical   physical conditions

=  IEEE802.3-2005

=  1000   BASE-PX20+

Optical   fiber

G.652   single-mode fiber

Ethernet   interface specification

standard

=  IEEE802.3

=  IEEE802.3au

=  IEEE802.3x

Port   number

4   FE

Connector   type

RJ-45

LAN

=  IEEE   802.3

=  10/100BASE-T,

=  Automated   negotiation

=  Full duplex/Half   duplex

=  Support   RJ-45 MDI/MDIX

VLAN

IEEE802.1q

Support the   connection distance

Up   to 100 meters

WLAN   specification

WLAN

Compliant   with IEEE802.11b/g/n

EMC   and safety

EMC

EN55022 B(CISPR 22B)

ESD defend and   preserve

IEC   61000-4-2 GR-1089-CORE

Laser eye safety

l  FDA 21CFR 1040.10 1040.11

l  EN(IEC) 60825-1

l  EN(IEC)   60825-2

Environment-protection   standard

RoHS

Environmental   requirements

Running   temperature

-10ºC~55ºC

Storage   temperature

-30ºC~60ºC

Operating   humidity

10%~90%   ,on-condensing

Storage   humidity

5%~95%   ,Non-condensing

Physical   specifications

Size

L   x W x H202mm x   128 mm x 31mm

Weight

<500g

 FA-EONU8421


Related Products

About Us

Products

News

Download

Contact Us

Copyright © 2007-2020 Fiberall Technology (Shenzhen) Co., Ltd- All Rights Reserved Technology by leadong